Work has started a little later than expected as I needed to do a bit of re-work on the front door. This rear door in particular has previously had poor repairs with lots of filler. The door has been chemically stripped and phosphate coated so I can now see what I am working with.
 |
| Body filler concealing the corrosion on the bottom of the door skin |
 |
| Corrosion on the seal holder and closing panels |
 |
| Door in place to check fit before cutting |
 |
| Bottom of door skin cut away |
 |
| Replacement repair panel held temporarily in place with clips to allow for any adjustments |
Are the inner rear wings OK? If the doors are that bad I would expect them to have gone, they are not as easy to fix as the door bottoms!
ReplyDeleteThey needed a little bit of work on them, repairs are finished now... nice and solid.
ReplyDelete